Disinfectant/SanitizerSaniDate 5.0 can be foamed, fogged or sprayed on hard surfaces to eradicate pathogens including avian influenza which is a commonthreat in hatcheries, poultry farms, and in processing plants.
Trailer/Truck DisinfectionSaniDate 5.0 effectively prevents cross-contamination from trailers and vehicles to poultry facilities and farms.
Poultry Water TreatmentSaniDate 5.0 eliminates mineral deposits, scale, and biofilms from waterlines and will efficiently control bacteria and algae. This EPA registered treatment is also accepted for use in maintaining the potability of poultry drinking water.
Foot Bath Pads, Mats, Walk Through TraysIdeal for foot bath pads, mats, or walk-through basins at the entrances of all buildings and rooms to prevent cross-contamination.
Mold and Mildew PreventionSaniDate 5.0 effectively inhibits the growth of mildew, mold, and the odors they release when applied to hard non-food contact, non-porous surfaces.
SaniDate 5.0’s activated peroxygen chemistry reacts to and oxidizes (kills) a broad spectrum of fungi and bacteria on contact, when the proteins and enzymes of simple cell organisms come in contact with the chemistry.
SaniDate 5.0 is an effective, powerful, peroxygen-based disinfectant and cleaner with many benefits such as:
It quickly inhibits the growth of many different types of mold, spores, mildew, and bacteria including:
SaniDate 5.0 is recommended for use in a wide variety of commercial environments including colleges, schools, dietary areas, industrial facilities, retail and wholesale establishments, recreational facilities, office buildings, veterinary clinics, animal hospitals, animal life science laboratories, catteries, farms, cages, kennels, kennel runs, feeding and watering equipment, zoos, pet shops, pet animal quarters, trucks, poultry premises, hatcheries, livestock quarters, stalls, stables, animal pens, packinghouses, food rendering and processing plants, floral shops, healthcare facilities, pharmaceutical and cosmetic facilities, hairdressing salons, barber shops, vehicles, trailers conveyors.
SaniDate 5.0 can also be used to disinfect, deodorize, and clean many non-porous, hard surfaces such as walls, floors, chairs, tables, countertops, bathroom fixtures, shelves, sinks, racks, carts, tile, exterior of refrigerators, coolers, vinyl, linoleum, plastic, porcelain, polyethylene, glass, stainless steel, fan blades, piping, drains, municipal, commercial, and process water handling and transfer systems, vats, tanks, filter housings, valves, and pumps.
Q: How can SaniDate 5.0 be used to clean lightly soiled hard, non-porous surfaces such as those listed above? A: For surfaces that are lightly soiled or have been pre-rinsed for heavy contamination, use a rate of 0.5 fluid ounce per gallon of water.
Q: How can SaniDate 5.0 be used to clean heavily soiled hard, non-porous surfaces? A: Use a rate of 1 fluid ounce per gallon of water. Apply SaniDate solution with a cloth, mop, sponge, scrubber, brush, or coarse spraying device to ensure that all affected surfaces are thoroughly soaked. Ensure that all surfaces stay wet for at least 10 minutes. Then remove the Sanidate solution and residual dirt or grime with a wet, clean cloth, mop, or wet vacuum. Prepare a fresh SaniDate solution daily, or when the solution gets diluted or dirty. Apply the solution every seven days, or more frequently if new contamination forms.
Q: How can SaniDate 5.0 be used to prevent mold and mildew build-up on new hard, non-porous surfaces? A: To prevent surface mildew and mold build-up on non-porous, hard surfaces in new or renovated buildings, mix SaniDate 5.0 at a rate of 0.5 fluid ounces per gallon of water. Apply the solution evenly over the surfaces to be protected using an airless sprayer, paintbrush, backpack sprayer, or low pressure hand wand. Ensure surfaces are uniformly wet without pooling or runoff. Treated surfaces must be totally dry before they can be painted or covered with wallboard, siding, or flooring. Although this treatment will prevent mold and mildew build-up in most situations, if mildew or mold does appear, repeat the application of Sanidate 5.0 as needed, following the additional steps listed below for remedial mold treatment.
Q: How can SaniDate 5.0 be used as part of a large-scale mold removal or water damage restoration project? A: Follow the instructions given in the previous question to prevent mildew and mold build-up on new hard, non-porous surfaces. In addition, investigate to find the root causes of the build-up, take the necessary steps to eliminate them, and dry the affected areas to under 20% moisture content before reapplying SaniDate 5.0. Mildew and mold may recur where there is standing water, relative high humidity, or hidden water leaks.
Q: How can SaniDate 5.0 be used to treat flooded areas and sewer backups? A: Mix SaniDate 5.0 at a rate of 1 fluid ounce per gallon of potable water. Remove filth by wiping, mopping, or coarsely spraying affected surfaces with the SaniDate 5.0 solution. Surfaces used for food preparation must subsequently be rinsed using potable or sterile water.
Q: What are some other good sources of information on how to treat mold and mildew? A: For useful standards and guidelines to follow, please visit:
Although SaniDate 5.0 contains only non-toxic chemicals, carriers require us to pay a Hazardous Materials charge for commercial-grade products. This cost is included in our shipping price.
SaniDate 5.0 ships only through Fedex Ground service. These shipping charges will be applied during checkout according to the destination "Zone" that the shipment is in. Customers must provide a street address when ordering.
We cannot ship SaniDate 5.0 to Hawaii in smaller quantities. Contact us to inquire about a volume shipment.